| Prev | Next |
Linux System:
Linux version 2.4.22 (root@lcdebian) (gcc version 2.95.4 20011002 (Debian prerelease)) #16 SMP Tue Oct 21 01:50:16 PDT 2003 |
Processor:
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.66GHz stepping : 7 cpu MHz : 2664.859 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 5321.52 |
ACPI:
/proc/acpi/info: version: 20030813 states: S0 S3 S4 S5 dmesg: ACPI: MADT (v001 A M I OEMAPIC 0x06000319 MSFT 0x00000097) @ 0x1ffd0390 ACPI: OEMB (v001 A M I AMI_OEM 0x06000319 MSFT 0x00000097) @ 0x1ffdf040 ACPI: DSDT (v001 UW UNIWILL 0x00000016 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Using ACPI (MADT) for SMP configuration information ACPI: Subsystem revision 20030813 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired ACPI Namespace successfully loaded at root c0454a7c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful Executing all Device _STA and_INI methods:................................[ACPI Debug] String: BAT_STA Start ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: Embedded Controller [EC0] (gpe 28) [ACPI Debug] String: BAT_STA Start [ACPI Debug] String: BAT_STA Start ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) PCI: Using ACPI for IRQ routing ACPI: AC Adapter [AC0] (on-line) [ACPI Debug] String: BAT_STA Start [ACPI Debug] String: BIf ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Thermal Zone [THRM] (75 C) Asus Laptop ACPI Extras version 0.24a |
Memory:
total: used: free: shared: buffers: cached:
Mem: 526340096 161972224 364367872 0 4128768 78651392
Swap: 501731328 0 501731328
MemTotal: 514004 kB
MemFree: 355828 kB
MemShared: 0 kB
Buffers: 4032 kB
Cached: 76808 kB
SwapCached: 0 kB
Active: 56808 kB
Inactive: 79528 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 514004 kB
LowFree: 355828 kB
SwapTotal: 489972 kB
SwapFree: 489972 kB
|
Interrupts:
CPU0
0: 37811 IO-APIC-edge timer
1: 1963 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
9: 0 IO-APIC-level acpi
12: 328 IO-APIC-edge PS/2 Mouse
14: 37843 IO-APIC-edge ide0
15: 8 IO-APIC-edge ide1
17: 33 IO-APIC-level O2 Micro, Inc. OZ6912 Cardbus Controller, Intel ICH4, ICH4/SmartRiser, eth0
NMI: 0
LOC: 37765
ERR: 0
MIS: 0
|
IO-Ports:
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0540-055f : Intel Corp. 82801DB/DBM SMBus Controller 0cf8-0cff : PCI conf1 4000-40ff : PCI CardBus #03 4400-44ff : PCI CardBus #03 b000-bfff : PCI Bus #01 b000-b0ff : ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] c800-c8ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller c800-c8ff : eth0 cc00-cc7f : VIA Technologies, Inc. IEEE 1394 Host Controller df20-df3f : Intel Corp. 82801DB USB (Hub #1) df40-df5f : Intel Corp. 82801DB USB (Hub #2) df80-df9f : Intel Corp. 82801DB USB (Hub #3) e000-e0ff : Intel Corp. 82801DB AC'97 Audio Controller e000-e0ff : Intel ICH4 e100-e13f : Intel Corp. 82801DB AC'97 Audio Controller e100-e13f : Intel ICH4 e200-e2ff : Intel Corp. 82801DB AC'97 Modem Controller e200-e2ff : ICH4/SmartRiser e300-e37f : Intel Corp. 82801DB AC'97 Modem Controller e300-e37f : ICH4/SmartRiser ffa0-ffaf : Intel Corp. 82801DB Ultra ATA Storage Controller ffa0-ffa7 : ide0 ffa8-ffaf : ide1 |
DMA:
4: cascade |
Serial Ports:
ttyS00 at port 0x03f8 (irq = 3) is a 16550A |
PCMCIA:
No pcmica devices come installed with the system. However we tested with a 3com pcmcia ethernet card. On inserting the card, the following were printed out: eth1: 3Com 3c589, io 0x300, irq 3, hw_addr 00:50:04:CD:26:5C 8K FIFO split 5:3 Rx:Tx, auto xcvr Then a lsmod output showed up as: Module Size Used by Tainted: P 3c589_cs 8132 0 (unused) The same was tried with an orinoco wireless card which was also detected and loaded without any problem |
Modem Probe:
slmdm: version 2.7.13 Mar 24 2003 17:03:00 (Smart Link Ltd.). slmdm: country set is 0xb5 (USA). Smart Link AMRMO modem. amrmo: probe 8086:24c6 Intel Corp. 82801DB AC'97 Modem Controller : ICH4/SmartRiser card... |
Components on the PCI bus:
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03) 00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03) 00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02) 00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02) 00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02) 00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02) 00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 02) 00:1f.6 Modem: Intel Corp.: Unknown device 24c6 (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4c66 (rev 01) 02:03.0 CardBus bridge: O2 Micro, Inc.: Unknown device 6972 02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host Controller (rev 80) 02:0c.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller |
Loaded Modules:
Module Size Used by Tainted: P usb-uhci 21284 0 (unused) slamrmo 180992 0 (unused) slmdm 1086496 0 [slamrmo] i810_audio 22944 0 (unused) natsemi 16384 1 |
IDE Disk Drives:
hda: IC25N040ATCS04-0, ATA DISK drive blk: queue c0470ce0, I/O limit 4095Mb (mask 0xffffffff) hdc: Slimtype COMBO LSC-24081M, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63, UDMA(100) ide-cd: passing drive hdc to ide-scsi emulation. hdc: attached ide-scsi driver. Partition check: hda: hda1 hda2 hda3 ide: late registration of driver. |
SCSI Disk Drives (or Emulation):
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: Slimtype Model: COMBO LSC-24081M Rev: 3M3E
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
es1371: version v0.32 time 17:43:27 Sep 30 2003
|
Output of the command "fdisk -l /dev/[hda|sda]":
Disk /dev/hda: 255 heads, 63 sectors, 4864 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 2432 19535008+ 83 Linux /dev/hda2 2433 4803 19045057+ 83 Linux /dev/hda3 4804 4864 489982+ 82 Linux swap |
Output of the command "df -h":
Filesystem Size Used Avail Use% Mounted on /dev/hda1 18G 2.5G 14G 14% / /dev/cdrom 333M 333M 0 100% /cdrom |
Network Adapter:
eth0: NatSemi DP8381[56] at 0xe0851000, 00:a0:cc:de:27:0c, IRQ 17. eth0: link up. eth0: Setting full-duplex based on negotiated link capability. |
Audio Device:
Intel 810 + AC97 Audio, version 0.24, 01:14:50 Oct 29 2003 PCI: Enabling device 00:1f.5 (0005 -> 0007) PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe100 and 0xe000, MEM 0x20000400 and 0x20000600, IRQ 17 i810: Intel ICH4 mmio at 0xe085a400 and 0xe085c600 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: VIA97 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 |
Video Subsystem:
(II) Primary Device is: PCI 01:00:0 (--) Chipset ATI RV250 Lf (M9) found |
X-info:
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.1.0, module version = 3.2.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI RV250 Lf (M9) found
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) /
X Window System
Release Date: 2 June 2001
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati,
ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage
128 RE (PCI),
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon
QD (AGP),
(**) RADEON(0): Depth 24, (--) framebuffer bpp 24
(II) RADEON(0): Depth moves disabled by default
|